|
(1) Hybrid Turbo Charger:
-
.57 compressor wheel trim mapped for low & high boost setups
-
Oil fitting gaskets & mounting studs included
-
Capable of producing over 450 horsepower
-
Wet float bearings & properly balanced
-
3" inlet diameter with a 2" outlet
-
.50 A/R compressor housing
-
.63 A/R turbine housing
-
1/8 NPT oil inlet
- T3/T4 hybrid
|
|
|
(1) Front Mount Intercooler:
-
Large design cools down the turbocharged air efficiently
-
Strong TIG welds will support high PSI levels
-
Lightweight aluminum racing intercooler
-
Extra thick core provides ample cooling
-
2.5" cold outlet & 2.5" hot inlet
- Less then 2% pressure drop
|
|
|
(1) Blow Off Valve:
-
Protects turbo by venting when shifting and/or reducing throttle
-
Performance design produces a powerful & aggressive sound
-
Quality design will not leak under high boost conditions
-
Flanges installed at user discretion
- Includes complete install kit
|
|
|
(1)
Slim Cooling Fan:
-
Fan can be used to cool: A/C condenser, oil or transmission cooler, mounting on an intercooler to prevent heat soak, or cooling a a2w radiator
-
Slim design provides excellent engine bay clearance
-
Includes the mounting tabs for a easy zip tie install
-
Reversible design can either pull or push air
-
Versatility of a push/pull reversible fan
-
Superior flow of a curved-blade design
-
Creates additional aftermarket cooling
-
1.25" thick outside perimeter
- 2.50" thick inside perimeter
|
|
|
(1) Fuel Pressure Regulator:
-
Great to setup fuel pressure for boosted engines
-
Includes complete install kit
-
Precision pressure gauge
- Fully adjustable
|
|
|
(1) Catch Can:
-
Stops excess oil from blowing to the intake manifold
-
Ensures better mileage & better performance
-
Removes oil vapors from breather line
-
Show like high quality polish
- Includes complete install kit
|
|
|
(1) 10 Meters Heat Wrap:
-
Heat powers the turbochargers turbine inlet. Keep the heat inside the exhaust pipes
-
Heat kills the turbochargers compressor inlet. Keep the heat out of the cold piping.
-
Control additional engine bay heat and prevent overheating.
-
Keep intercooled air cooled.
- Made of very high temp fiberglass.
|
|
|
(1) Radiator Hose Sleeving Kit:
-
Stainless braiding makes rubber radiator hoses up to 5x stronger
-
Makes engine bay look of show car quality
-
Strong construction provides years of reliability
- Anodized ends for the authentic race like finish
|
|
|
(1) Universal Intercooler Piping Kit:
-
Lightweight yet strong aluminum piping
-
May necessitate light modification to fit
-
(8) stainless steel worm gear clamps
-
(1) 2.5” 90 degree silicone couplers
-
(3) 2.5” straight silicone couplers
-
(1) 90 degree 2.5” bends
-
(1) 60 degree 2.5” bends
-
(1) 45 degree 2.5” bends
- (1) straight 2.5” pipes
|
|
|
(1) Non-divided T3 Flange
-
Water jet cut for precision flow
-
Mild steel for easy welding to an adapter pipe or direct to stock manifold
|
|
|
(1) Turbo Ram Inlet
-
Increases airflow into the turbo system
-
Replaces the filter for track performance
-
Acts as a Ram Air
- Ultra lightweight and strong aluminum
|
|
|
(1) Tachometer w/ Shift Light
-
5" sized
-
White face, back lit
-
11k RPM max
- Programmable shift light for perfect shifts
|
|
|
(1) Oil Pressure Gauge
-
White face, back lit
-
0-100psi range
- Mounting hardware and wiring included.
|
|
|
(1) Water Temp Gauge
-
White face, back lit
-
Small, lightweight design for an easy install anywhere
- Mounting hardware and wiring included.
|
|
|
(1) Oil Temperature Gauge
-
White face, back lit
-
Small, lightweight design for an easy install anywhere
- Mounting hardware and wiring included.
|
|
|
(1) Boost/Vacuum Gauge
-
White face, back lit
-
30in/hg vacuum, 30psi boost pressure
- Mounting hardware and wiring included.
|
|
|
(1) Volt Gauge
-
White Face, back lit
-
8v to 16v range
- Mounting hardware and wiring included.
|
|
|
(1) Dash Gauge Pod
-
Mounts on dash or center console
-
Angles 2 gauges perfectly to the driver
-
Lightweight plastic, hollow backing for gauge wire tucking
- Textured finish, for an OEM look.
|
|
